Diversey Heavy Duty Prespray Plus

For Prespray Cleaning

• Thoroughly vacuum carpet and pre treat spots.
• Dilute 10 oz. Heavy Duty Prespray with 1 gallon hot water (1 L with 12 L) in pump-up sprayer or fill directly from J-Fill® dispenser.
• Spray carpet completely paying particular attention to traffic lanes and spots.
• Agitate with a carpet rake extractor brush shampoo brush or bonnet.
• Allow 5-10 minutes for Heavy Duty Prespray to completely loosen soils.
• Thoroughly extract carpet with Extraction Rinse according to use directions. Use Liquid Defoamer in recovery tank if required.

For Bonnet Cleaning

• Dilute at 1:32 or 4 oz./gal. (35 mL per L) with warm water.
• Apply light mist onto carpet bonnet.
• Bonnet buff carpet with your pad. Flip pad when soiled. When both sides are soiled rinse or launder.
• e This solution can also be used for spot treatment. Treat spot agitate and rinse thoroughly.

For Prespray Cleaning

• Thoroughly vacuum carpet and pre treat spots.
• Dilute 10 oz. Heavy Duty Prespray with 1 gallon hot water (1 L with 12 L) in pump-up sprayer or fill directly from J-Fill® dispenser.
• Spray carpet completely paying particular attention to traffic lanes and spots.
• Agitate with a carpet rake extractor brush shampoo brush or bonnet.
• Allow 5-10 minutes for Heavy Duty Prespray to completely loosen soils.
• Thoroughly extract carpet with Extraction Rinse according to use directions. Use Liquid Defoamer in recovery tank if required.

For Bonnet Cleaning

• Dilute at 1:32 or 4 oz./gal. (35 mL per L) with warm water.
• Apply light mist onto carpet bonnet.
• Bonnet buff carpet with your pad. Flip pad when soiled. When both sides are soiled rinse or launder.
• e This solution can also be used for spot treatment. Treat spot agitate and rinse thoroughly.