Tripp Lite UPS Smart 1000VA 500W Back Up Tower LCD AVR 120V USB Coax RJ45 - 2U Tower - 8 Hour Recharge - 3 Minute Stand-by - 120 V AC Input - 120 V AC Output - 4 x NEMA 5-15R, 4 x NEMA 5-15R
Line-Interactive Digital UPS System offers voltage regulation, surge suppression and battery support for personal computers, network workstations and more. Internal UPS circuits support entry-level PCs for 60 minutes or individual VCR/DVR for 3 hours during power failure. AVR circuits regulate brownouts as low as 89 volts back to usable levels without using battery power. Includes 4 battery-supported outlets, plus 4 surge suppression-only outlets. USB port enables optional unattended system shutdown without data loss; cable included. HID-compliant USB interface enables integration with built-in power management and auto shutdown of Windows, Mac OS X and Linux. Built-in single-line RJ-11 phone suppression jacks protect modem and satellite receiver with standard dialup/DSL phone connection. 2.2 GHz coaxial jacks protect against surges on CATV, satellite or broadcast antenna connections. 3 minute battery runtime with full load of 1000VA/500W and 10 minutes with half load of 500VA/250W.
Specifications
Additional Information
Low voltage transfer to battery power: Switches to battery power as line voltage decreases to 89V or less switches back to AC mode as line voltage increases to 94V or higher
High voltage transfer to battery power: Switches to battery mode as line voltage increases to 139V or higher switches back to AC mode as line voltage decreases to 135V or lower
Typical Applications: Entry-level PCs networked workstations point-of-sale equipment small business phone systems audio/video equipment and home theater systems. Ideal for sensitive electronic applications in areas where brownout conditions are common
Cold Start: Yes inverter can be "cold started" to enable temporary AC output during a power failure
Switches: Includes 2 front panel switches - one main on/off power switch and one dual function "alarm cancel" / "self test" button
